my mk2 16v project.

Subject: my mk2 16v project. Sun Dec 28 2008, 19:26

Hear is a few picks of my mk2 16v project, at least i hope as i havent got use to this image posting thing yet.
shes an f reg mk2 16v with a 2.0 bottom end, done 113k.
at the moment is a non runner as the starter has garn, however i replaced it but it still nouat happens scratch

my plans are to weld up the battery tray, sort a couple of scabs on the bottom of the doors, and gernley clean and tidy it up.
im in need of a idle control unit and a cold start unit.

my mk2 16v project. >

https://2img.net/h/i364.photobucket.com/albums/oo86/liamb91/Photo-0006.jpg

let me know what you think.

Subject: Re: my mk2 16v project. Sun Dec 28 2008, 19:31

Looks nice to me, what do you mean nothing happens? does it not even turn over or make a noise? are the dash lights on? is the battery charged?

Subject: Re: my mk2 16v project. Sun Dec 28 2008, 19:34

doh! still havent got the hang of pick posting Mad

anyways all it cost me was £200, which included a set of FK coilovers that were new for inters this year, 2 sets of wheels, a brand new n/s bottom arm, infinty 6" 9", 2 amps, a sub and a brand new starter motor. Very Happy

Subject: Re: my mk2 16v project. Sun Dec 28 2008, 19:36

when the onld one was conected it used to make a clicking sound, i chared the batary up over nite, fitted the new starter and now not a thing happens!!

Subject: Re: my mk2 16v project. Sun Dec 28 2008, 21:52

get some nice rims and a badged grille and will look sweet, is it an oaky?

Subject: Re: my mk2 16v project. Mon Dec 29 2008, 07:54

looking good mate
have u got all the wires on it should be 2 round terminal ones that go on the threaded bit with the 13mm nut
and 2 with spade terminals u may have the 2 spade ones thewrong way round

Subject: Re: my mk2 16v project. Mon Dec 29 2008, 13:16

my valvers have made the clicking noise before either when the battery is dead or the alternator is nackered

Subject: Re: my mk2 16v project. Mon Dec 29 2008, 17:29

caddyman wrote:: looking good mate
have u got all the wires on it should be 2 round terminal ones that go on the threaded bit with the 13mm nut
and 2 with spade terminals u may have the 2 spade ones thewrong way round

i think so, i wired it up the same as the old one, however this one is a pattened part! im braking one at the moment so im going to try the starter of that as i know its ok,

Subject: Re: my mk2 16v project. Mon Dec 29 2008, 17:31

Whitegt wrote:: get some nice rims and a badged grille and will look sweet, is it an oaky?

going to put the g60 steels from my mk3 on to it, have a gti twin badged grill but i dnt like it!

Subject: Re: my mk2 16v project. Mon Jan 05 2009, 21:12

i started to give my mk2 a clean up at the weekend, i even managed to rope the old man into helping, i also fitted a new coil and got my Nana Laughing

Subject: Re: my mk2 16v project. Mon Jan 05 2009, 21:20

Dam It, still cant get this image hoasting!!

Subject: Re: my mk2 16v project. Mon Jan 05 2009, 21:28

got a boet and slam panel if u need one mate
looks like its coming on well

Subject: Re: my mk2 16v project. Mon Jan 05 2009, 22:23

when using photobucket you need to copy and paste the link i have highlighted.

sais image code - give it a try!

my mk2 16v project. Untitled-1

Subject: Re: my mk2 16v project. Mon Jan 05 2009, 22:24

you should be a teacher mark Razz

Subject: Re: my mk2 16v project. Mon Jan 05 2009, 22:25

most people wouldnt want to learn what i have to teach Shocked

Subject: Re: my mk2 16v project. Mon Jan 05 2009, 22:27

oh really?

Subject: Re: my mk2 16v project. Sun Jan 11 2009, 13:32

has been a good morning for the 16v, after some help from the club gti fourm have mannged to get it running. found the problem! it was the overrun run cut off valve had come dissconected from the air box. i reconected it and replaced all the vacume pipes as some were split, only have one more to replace, put a can of petrol in it and it fired up first time, it runs fine and idles fine as well.

Subject: Re: my mk2 16v project. Sat Mar 07 2009, 18:51

took the spats off today to find that the sills are nacked! im thinking of braking it, ill post some pick.

Subject: Re: my mk2 16v project. Sat Mar 07 2009, 19:42

give me a shout if your breaking it mate theres loads i need. Or if you wanna sell the whole car cheap i'll buy it?

Subject: Re: my mk2 16v project. Sat Mar 07 2009, 22:11

will do tiz, i may weld it up, it wont be pritty but it will be useable! or i may get a 1.8 driver coz the insurance on a gti is sky hight! if i do im going to use the coilovers and few other bits from it, then it will be up for grabs!

Subject: Re: my mk2 16v project. Sat Mar 07 2009, 22:41

first dibs on the grill:cheers: and wheel arch trims too if I may? cheers

Subject: Re: my mk2 16v project. Sun Mar 08 2009, 05:35

I'am interested in the complete running gear, if not available then i'd just want the engine loom/ecu but i'd have to remove as its delicate.

Subject: Re: my mk2 16v project. Sun Mar 08 2009, 09:58

i call dibs on the whole car Very Happy

» My On Going Project
» project mk5
» my new project!
» new project