alex'87
 Number of posts : 261
Age : 37
Location : stretham, ely
Drives : mk3 golf derv wagon, mk1 caddy (project),mk1 mx5 skidder (project)
Registration date : 2008-07-05
 | | Subject: servo upgrade!!! Sat Aug 16 2008, 19:01 | |
| just doin up me new project and need some help/ advice.
its a 1990 polo mk2 1300, and has no servo fitted as standard.
anyone know if i can fit my ol mk3 one? or any vag servo? help!
oh, and will minilites from mini fit 4*100 stud pattern?? | |
|
MarkGTX
Number of posts : 2925
Age : 36
Location : fens!
Drives : Rocco and Passat
Registration date : 2008-01-19
| | Subject: Re: servo upgrade!!! Sun Aug 17 2008, 01:20 | |
| cant help on the servo, but the minilites wont fit. i think minis are 4x98 wheres the polo is 4x100. you can fit them with wobble bolts though. | |
|
Volks
Number of posts : 68
Location : Chatteris
Drives : non VAG
Registration date : 2008-06-18
| | Subject: Re: servo upgrade!!! Sun Aug 17 2008, 08:12 | |
| Mini PCD is 101.6 but like MarkGTX said can be fitted with wobble bolts or re-drilled. Offset can be issue. | |
|
LewisG
Number of posts : 245
Age : 35
Location : Fordham/Newmarket
Registration date : 2008-01-19
| | Subject: Re: servo upgrade!!! Mon Aug 18 2008, 19:02 | |
| the servo should fit as the mk2 and mk3 parts are pretty much exactly the same. just use everything off your mk3 like master cylinder and maybe up to the pedal if its different. you will also have to use the mk3 inlet mani so it will power the servo and you will need to block off a pipe that comes off the main servo to inlet hose, as i dont think your mk2's dizzy has a vacuum advance. | |
|
Sponsored content
| | Subject: Re: servo upgrade!!! | |
| |
|
