6n2 lights to 6n wire loom

I've got the 6n2 lights with the bulbs holders will the 6n wire loom fit or do I have to cut it to make it fit .
I'm not sure on wat I have to do as I've never used these lights
Cheer stuart

You have the lights yes? you have the car yes? 1+1 is..............

I know that but its the wiring

I think Matty means if you've got the lights and the car to hand, why not give it a go. That way you'll know whether or not you'll need to adapt them.

http://www.uk-polos.net/

go down to DIY guides and there is one 3/4 of the way down the page which has the guide on there

It's quite easy if you look at the bulb holders you can follow the metal tracks from each bulb to it's pin on the plug, now do this for both and you will then know which wires to switch over.
All the bulbs have a common earth/negative so one of the pins in the plug will go to all the bulbs. if you remove a bulb and look into the bottom of the socket you will see a metal tab, that's the positive and thats what you follow to the plug.
The thicker brown wire will be the common earth and the thinner wires will be to the separate stop, tail, indicator and fog or reverse lights.
just remember it might not be the same on both sides.
thats all the information to work it out for yourself or you can just follow a guide with pictures