dished steels sizes?

AJ.K · Subject: dished steels sizes? Tue Sep 29 2009, 13:39

ive looked on polley motorsports at the dished steels

what size would i want for mk1 golf?

also would they be practical to fit my mk2 clio till i get my golf ??

http://www.polleymotorsport.co.uk/polley/catalogue_wheels_category_final.asp?manufacturer=Weller%20Wheels&category=Steel%20Wheels

anyone helpppppppppp

CaddyRage · Subject: Re: dished steels sizes? Tue Sep 29 2009, 14:11

if your going to get steels to fit either car then state them for your clio

reason is, renault have a centre hub bore of 60.1 and vw is 57.1 so...

if you had vw wheels, you'd have to get the centres milled out to fit the renault but...

if you get renault steels, then you can use spigot rings to make them work on the vw

what size you after?
14's, 15's or 16's

_________________

Paintwork Restorer and odd job man!. PM me with enquiries

onlyady · Subject: Re: dished steels sizes? Tue Sep 29 2009, 15:07

I have 15x8.5 banded renault steels on my mk1 with spigot rings and stretched tyres

AJ.K · Subject: Re: dished steels sizes? Tue Sep 29 2009, 20:00

CaddyRage wrote:

if your going to get steels to fit either car then state them for your clio

reason is, renault have a centre hub bore of 60.1 and vw is 57.1 so...

if you had vw wheels, you'd have to get the centres milled out to fit the renault but...

if you get renault steels, then you can use spigot rings to make them work on the vw

what size you after?
14's, 15's or 16's

see i knew someone would be a expert

i duno what size do i want for a mk1 you reckon?
i have 17" alloys on my clio but it was just a thought to get em the right size for the dub and then spacer them out

CaddyRage · Subject: Re: dished steels sizes? Tue Sep 29 2009, 22:26

The ET between renault and vw wheels is near on the same mate.

15's would work on both cars, 14's prob to small for the clio

Look for some 15in renault steels

they'll be on most meganes and scenics

_________________

Paintwork Restorer and odd job man!. PM me with enquiries

AJ.K · Subject: Re: dished steels sizes? Wed Sep 30 2009, 20:43

CaddyRage wrote:

The ET between renault and vw wheels is near on the same mate.

15's would work on both cars, 14's prob to small for the clio

Look for some 15in renault steels

they'll be on most meganes and scenics

14s are put on the mark 2 non facelift model sits on 14inches so it will go so i will go for 14s i reckon

http://www.polleymotorsport.co.uk/polley/catalogue_wheels_final.asp?id=92&manufacturer=Weller Wheels

on that link above^^ polleymotorsport the sizes what are the they like
im lookin at the black steels.. 10x13 ?? but whas the bloody 10 and 13 width depth etc>??

can you help lol
tyy

james. · Subject: Re: dished steels sizes? Wed Sep 30 2009, 20:47

Its just the size mate i think.. probably for an old mini ect. 5x10 = the wheel will be 5j wide and be 10 inch diameter.

CaddyRage · Subject: Re: dished steels sizes? Wed Sep 30 2009, 20:49

Its a 10in by 5j wide wheel mate for mini's. No good to you

None of them are

_________________

Paintwork Restorer and odd job man!. PM me with enquiries

AJ.K · Subject: Re: dished steels sizes? Wed Sep 30 2009, 20:51

CaddyRage wrote:

Its a 10in by 5j wide wheel mate for mini's. No good to you

None of them are

o rite ok thanks for clearing that up lol

so ive gota get a set of steels to fit ?
and then have them banded together with another set

this is so confusing lol

thanks for your help thoo

AJ.K · Subject: Re: dished steels sizes? Wed Sep 30 2009, 20:53

or would it be better to get some 15" ats cups or sumin in that region