Alriight

Welcome cup cake i like muffin myself

pffft well no cakes for you then!

Yeah i'll take a look at the heating if need be

Cupcake wrote:

Yeah it works as normal, other than the odd bits of leaves coming through the blowers aha, but other than that it does all the 3 speeds, it just comes out cold and every now and then you get a little burst of warm air and then it goes cold again :[
My poor cold baby

the mk2 polos and the mk2f dont blow how hair threw the blowers

i all wasys use the dash vents to warm the car up

but if them blowing hot air you need to do this


http://z8.invisionfree.com/POLO3/index.php?showtopic=9948&st=0&#entry2398206




hope this helps

Welcome.

Cupcake wrote:

pffft well no cakes for you then!

no go on please and ill bring my odd character too

hi and welcome

warm welcome to u

hi and welcome

hello and welcome

hi there cupcake welcome to the site sounds like youve got the same problems as me with your heaters hope it helps.

QUICK HEATERS BY GAL
heres what to tell your boyfriend to do or so not to sound sexist ahem lol you can do or maybe best i could do if you bring it over:

when the engine is cold find the 2 pipes which go into your car through the bulkhead inline on the hoses you should have a pear of pressure valves jubilee clipped inline with a smaller pipe connecting them.

next undo the jubilee clips and pull out the valves then get a peice of copper tube the same size as the inside diameter of the hoses and cut 2 peices the same length if not a little longer than the valves then push them into both hoses and do up the jubilee clips very tight.

and there you go you should have heat for the winter but maybe try to souce a couple of new valves trouble is vw dont make them anymore so might be hard or like me just forget it lol there basically there so the heater rad doesnt burst but to be honest i dont think mine will so its upto you.

i actually used my vw wheel brace and cut that up lol as its an exact fit plus its galvanized looks cool as its got vdub down one of the bits of pipe lol

hope this helps if not bring it over one weekend and i'll take a ganda

cheers
Gal

STRASSE KRIEGER wrote:

hi there cupcake welcome to the site sounds like youve got the same problems as me with your heaters hope it helps.

QUICK HEATERS BY GAL
heres what to tell your boyfriend to do or so not to sound sexist ahem lol you can do or maybe best i could do if you bring it over:

when the engine is cold find the 2 pipes which go into your car through the bulkhead inline on the hoses you should have a pear of pressure valves jubilee clipped inline with a smaller pipe connecting them.

next undo the jubilee clips and pull out the valves then get a peice of copper tube the same size as the inside diameter of the hoses and cut 2 peices the same length if not a little longer than the valves then push them into both hoses and do up the jubilee clips very tight.

and there you go you should have heat for the winter but maybe try to souce a couple of new valves trouble is vw dont make them anymore so might be hard or like me just forget it lol there basically there so the heater rad doesnt burst but to be honest i dont think mine will so its upto you.

i actually used my vw wheel brace and cut that up lol as its an exact fit plus its galvanized looks cool as its got vdub down one of the bits of pipe lol

hope this helps if not bring it over one weekend and i'll take a ganda

cheers
Gal

read my post its imposible with out doing what ive showed

hello & welcome

welcome

azzeer wrote:

STRASSE KRIEGER wrote:

hi there cupcake welcome to the site sounds like youve got the same problems as me with your heaters hope it helps.

QUICK HEATERS BY GAL
heres what to tell your boyfriend to do or so not to sound sexist ahem lol you can do or maybe best i could do if you bring it over:

when the engine is cold find the 2 pipes which go into your car through the bulkhead inline on the hoses you should have a pear of pressure valves jubilee clipped inline with a smaller pipe connecting them.

next undo the jubilee clips and pull out the valves then get a peice of copper tube the same size as the inside diameter of the hoses and cut 2 peices the same length if not a little longer than the valves then push them into both hoses and do up the jubilee clips very tight.

and there you go you should have heat for the winter but maybe try to souce a couple of new valves trouble is vw dont make them anymore so might be hard or like me just forget it lol there basically there so the heater rad doesnt burst but to be honest i dont think mine will so its upto you.

i actually used my vw wheel brace and cut that up lol as its an exact fit plus its galvanized looks cool as its got vdub down one of the bits of pipe lol

hope this helps if not bring it over one weekend and i'll take a ganda

cheers
Gal

read my post its imposible with out doing what ive showed

Azzeer,
sorry mate but i just couldnt get your link to work?? dont know if other people had trouble with it too? so i just thought i'd offer my advice on how i fixed mine dont even know if the polos are the same setup at the end of the day mate i would still have fixed it for her if i could cant be nothing serious really.

cheers
Gal