HomeHome  ­FAQFAQ  ­SearchSearch  ­RegisterRegister  ­MemberlistMemberlist  ­UsergroupsUsergroups  ­Log inLog in  
Post new topic   Reply to topicfendubbers :: Useful Traders :: MVdevelopmentsShare | 
 

 Help

View previous topic View next topic Go down 
AuthorMessage
PoloGTI



Male Number of posts: 36
Age: 24
Location: Wisbech
Drives: Audi A3 8L 1.8T Quattro & Mk2 Polo Coupe S
Registration date: 2008-07-02

PostSubject: Help   Thu Apr 30 2009, 03:32
Hi I have a 1999 8L Audi A3 Quattro 1.8 20VT AJQ Engine and I have got the following vagcom fault codes and I get the following error intermittently when my car is accelerating the boost goes up to 25psi and the engine cuts out and the engine warning light comes on do you know what the manifold boost pressure sensor is and looks like.

VAG-COM Version: Release 409.1-US

Control Module Part Number: 06A 906 032 AF
Component and/or Version: 1.8L R4 5VT 0004
Software Coding: 05600
Work Shop Code: WSC 06435
5 Faults Found:
16622 - Manifold Pressure / Boost Sensor (G31): Signal too High
P0238 - 35-00 - -
16490 - Shareware Version. To Decode all DTCs
P0106 - 35-00 - Please Register/Activate
17743 - Shareware Version. To Decode all DTCs
P1335 - 35-10 - Please Register/Activate - Intermittent
16487 - Mass Air Flow Sensor (G70): Signal too High
P0103 - 35-10 - - - Intermittent
17978 - Shareware Version. To Decode all DTCs
P1570 - 35-10 - Please Register/Activate - Intermittent

_________________

A3 1.8T Quattro Sport, JabbaSport Remap, Weitec Coilovers, BMC Panel Filter, Forge 007, Facelift Xenon Lights, Facelift Rear Clusters, BOSE, Black Leather Interior, Auto Gauge Boost Gauge.
To Come: Jetex Induction Kit, 18" Wheels, Full Stainless System.
Back to top Go down
View user profile http://www.route76.co.uk
mvdevelopments



Number of posts: 156
Registration date: 2008-02-07

PostSubject: Re: Help   Sat May 02 2009, 07:49
just a quick one mate, ive had a similar problem with a leon after it had been mapped, it would go into limp home mode after a good thrash and through fault codes up

has this happened since its been mapped 1st off?
Back to top Go down
View user profile
PoloGTI



Male Number of posts: 36
Age: 24
Location: Wisbech
Drives: Audi A3 8L 1.8T Quattro & Mk2 Polo Coupe S
Registration date: 2008-07-02

PostSubject: Re: Help   Sat May 09 2009, 02:26
mvdevelopments wrote:
just a quick one mate, ive had a similar problem with a leon after it had been mapped, it would go into limp home mode after a good thrash and through fault codes up

has this happened since its been mapped 1st off?

It started to happen a couple of months after i had it mapped, i have been told that it could be a boost pipe with a small crack or split in it so i am gonna check those.

_________________

A3 1.8T Quattro Sport, JabbaSport Remap, Weitec Coilovers, BMC Panel Filter, Forge 007, Facelift Xenon Lights, Facelift Rear Clusters, BOSE, Black Leather Interior, Auto Gauge Boost Gauge.
To Come: Jetex Induction Kit, 18" Wheels, Full Stainless System.
Back to top Go down
View user profile http://www.route76.co.uk
 

Help

View previous topic View next topic Back to top 
Page 1 of 1

Permissions of this forum:You cannot reply to topics in this forum
fendubbers :: Useful Traders :: MVdevelopments-
Post new topic   Reply to topic