Need to sort out my horn on the cabby for the mot want toput it to a button on the dash but im shocking at electrics. Can any1 tell me basically which wires i need to run?

Any help would be good cheers

the easiest way is to run a new cable from inside the car to the horn
disconnect the yellow/black wire on the horn and connect your new cable to that
then inside the car take the new cable to a momentary push button and then connect the other side of the switch to an ignition live
the ignition live is a black wire and can be found either at the ignition switch or you cna take it from the back of the fuse box

Cheers m8, the trouble is the horn didnt work before i changed the steering wheel, really dont knwo why. its not the fuse cuz thats fine, what else could it be, is there a relay for the horn?

yes there is a relay but i cannot remember which one

Ok cheers ill have a go n try n sort it 2mora.

Await pics of the cabby on fire in my build thread

have you spoken to our retarded friend joe? ask him how he done his.

if it dont work, just do what im doin when my car runs out of m.o.t, dump it in my brothers car park with keys and logbook

are you sure the actual horn isnt duff? Put a multi meter on the wiring and see where your getting power and where your not.

Thats a fair point actually. ill try another 1 on it and see what happens

all this talk about horns is making me feel horny

Haha


Al sorted now peeps, the original horn did work on occation with a direct pos and neg but not when i wired it all in for some reason, but i had an old air horn type thing layign about so tried that and it work so ill leave that on.


PS i foooking hate midgies